Plug the power cord into the power socket, press the main power switch, and start the touch screen after the main machine starts successfully to enter the cutting operation interface.
Confirm whether the internal components of the Cutting machine flat laser are operating normally, including the cutting knife, feeding wheel, edge trimming device, etc. If there is any abnormality, please stop the operation and notify the maintenance personnel.
Cutting machine flat laser Power on and gas source. Take the glass. The designated personnel are responsible for cleaning the glass surface and paying attention to whether there is any abnormality in taking the glass. If there is any abnormality (such as taking out the inner glass, the wooden box stuck with the glass, etc.), a stop signal should be issued immediately, and the main operator should press the "emergency stop" switch.
After the glass is automatically transported to the cutting table for positioning, check whether the positioning is accurate. If it is inaccurate, it needs to be repositioned. Operate the keyboard and enter the data. The input data should be based on the product inspection standards and customer cutting requirements to control the dimensional error. Start the cutting head to cut the glass.
Press the transmission button, turn on the air cushion device, and cut and remove the glass. The glass should be stacked neatly and orderly. The glass should be separated by soft materials such as newsprint or foam, and it is strictly forbidden to press the small one. Keep the work machine and site clean and keep a work diary.
Hot Tags: cutting machine flat laser, China cutting machine flat laser manufacturers, factory, cutting packaging, cutting customization, cutting guide, cutting blade, cutting industry, stone cutting machine
